⭐⭐⭐⭐⭐
Change Your Oil Without Crawling Under The Car
Forget struggling with drain plugs, lifting the vehicle, or lying underneath your car.
This 12V Electric Oil Extractor Pump pulls old oil directly through the dipstick tube, helping you complete routine fluid changes from above the engine bay—cleaner, easier, and more convenient.
Why People Love Our Product
DIY Oil Changes Made Simple
Warm the engine oil, switch the engine off, then connect the red clamp to the battery’s positive terminal and the black clamp to the negative terminal. Insert the inlet tube into the dipstick opening, place the outlet tube into a suitable waste-oil container, then switch on the pump.
For best performance, make sure the hoses are securely connected and avoid exceeding the 30-minute continuous duty cycle.
Take Control Of Routine Maintenance
You don't need a complicated workshop setup for every oil change. With a compact 12V pump and included extraction tubes, you can handle compatible fluid changes right in your garage or driveway.
The pure copper motor, aluminum-alloy construction, secure hose connections, and 12V battery-powered design give DIY vehicle owners a practical tool they can keep ready for the next maintenance job.
30 Day Guarantee
Frequently Asked Questions
It is designed for compatible engine oil, lubricating oil, gear oil, and transmission fluid. Do not use it to pump gasoline, diesel, water, or other highly flammable/incompatible liquids.
It can be used with many cars, trucks, motorcycles, ATVs, lawn mowers, and generators where fluid can be accessed with the supplied tubing. Always check that the tube can safely reach the fluid reservoir before use.
The rated flow range is approximately 1–4 L/min, but actual speed depends heavily on oil viscosity and temperature. Thick or cold oil will pump more slowly, so warming the oil before extraction can improve flow.
The pump runs from a 12V power source and includes battery clamps for convenient connection to a compatible vehicle battery. Connect red to positive (+) and black to negative (–) before switching the pump on.
The specified continuous duty cycle is up to 30 minutes. Avoid running the pump dry, and switch it off when extraction is complete.
The kit includes the 12V oil extractor pump, inlet and outlet tubing, push connectors, mounting screws, and outlet clamp. The included tubing provides different sizes to help with common extraction applications.